Robots - Debot5 - Versions - MarkIII Controller Pin Out Table for Hardware Version .01
| Function | J1 | Designation | Function | J1 | Designation | |||
| RA0 | RC0 | |||||||
| RA1 | RC1/CCP2 | |||||||
| Turret Distance Sensor | (11) | RA2 | RC2/CCP1 | |||||
| RA3 | I2C SCL | SCL | (31) | RC3 | ||||
| RA4 | I2C SDA | SDA | (33) | RC4 | ||||
| RA5 | RC5 | |||||||
| RB0 | Serial TX | TX | (37) | RC6 | ||||
| Right Wheel Servo | SVR | (18) | RB1 | Serial RX | RX | (39) | RC7 | |
| Left Wheel Servo | SVL | (16) | RB2 | RD0 | ||||
| RB3 | RD1 | |||||||
| RB4 | RD2 | |||||||
| Right Wheel Encoder | WER | 10 | RB5 | RD3 | ||||
| Left Wheel Encoder | WEL | 8 | RB6 | RD4 | ||||
| Turret Servo | SVT | 6 | RB7 | RD5 | ||||
| V+ | 4 | Mode Switch | SW1 | 28 | RD6 | |||
| VSS | 2 | Mode LED | D1 | 26 | RD7 | |||
| RE0 | ||||||||
| RE1 | ||||||||
| RE2 |
( ) around number in J1 column means signal not taken from J1 but from other connector on MarkIII board.
If you have any questions or comments about this page please email me at: debots_replacethis_dinkdaze.org with at sign.